Operation manual (OIM-1005E) · Part 0 · scan pages 1-8
Front Matter
OIM-1005E
OTARI®
MX-5050 PROFESSIONAL RECORDER
INSTRUCTION MANUAL
⤢ zoomMX-5050 recorder loaded with two Otari Electric Co., Ltd. reels
CAUTION↑ TOP
To prevent fire or shock hazard:
Do not expose this appliance to rain or moisture.
Do not remove back.
No user-serviceable parts inside.
Refer servicing to qualified service personnel.
MX-5050 SERIES PROFESSIONAL RECORDER — INTRODUCTION↑ TOP
This manual provides descriptive information, installation, operation instructions, preventive maintenance and normal adjustments for the Otari MX-5050 Series Professional Recorder.
⤢ zoomMX-5050 Recorder (2-Channel Version in Standard Wooden Case)
COMMUNICATION WITH OTARI — FOR SERVICE INFORMATION AND PARTS↑ TOP
The OTARI PRODUCTS are manufactured under strict quality control and each unit was carefully tested and inspected prior to shipment from our factory.
If, however, some adjustments or technical support become necessary, replacement parts are required, or technical questions arise, please contact your nearest Otari dealer or write to:
| OTARI ELECTRIC CO., LTD. | OTARI CORPORATION |
|---|---|
| 4-29-18, Minami Ogikubo, | 981 Industrial Road, San Carlos, |
| Suginamiku, Tokyo, 167, Japan | California 94070, U. S. A. |
| Phone: (03) 333 - 9631 | Phone: (415) 593 - 1648 |
| Telex No.: OTRDENKI J26604 | Telex No.: TWX 910-376-4890 |
Another part of Otari continous technical support program for our products, is the continous revision of manuals as the equipment is improved or modified.
In order for you to receive our information and service applicable to your requirement, and for the technical support to function properly, please include the following information, most of which can be obtained from the name plate on the equipment.
- Model Number
- Serial Number
- Date of purchase
- Name and address of dealer from whom machine was purchased.
- Power requirements (voltage and frequency)
- Manual number which you are referring
TABLE OF CONTENTS↑ TOP
LIST OF ILLUSTRATIONS AND TABLES↑ TOP
List of Illustrations↑ TOP
| Figure | Title | Page |
|---|---|---|
| — | MX-5050 Recorder (2-channel version in wooden case) | (Frontispiece) |
| I-1 | MX-5050 Major Components | I-1-(1) |
| II-1 | Equipment Dimension | II-3 |
| III-1 | Tape Threading | III-2-(1) |
| III-2 | Tape-Splicing Block | III-2-(6) |
| IV-1 | Removing Head Cover | IV-2-(1) |
| IV-2 | Demagnetizing | IV-2-(2) |
| IV-3 | Lubrication | IV-2-(3) |
List of Tables↑ TOP
| Table | Title | Page |
|---|---|---|
| I-1 | MX-5050 Model Configurations | I-1 |
| I-2 | Available Standard Tape Speed Combinations | I-1-(1) |
| I-3 | Head Assembly Configurations | I-1-(3) |
| I-4 | Standard Accessories | I-2 |
| I-5 | Optional Accessories | I-3 |
| I-6 | Specifications of MX-5050 | I-5 |
| II-1 | Rear Connector Panel | II-4 |
| III-1 | Tape Transport Controls and Indicators | III-1 |
| III-2 | Record/Reproduce Electronics Controls and Indicators | III-1 |
| IV-1 | Test & Maintenance Equipment | IV-1 |
SCHEMATIC DIAGRAM↑ TOP
| Drawing No. | Title |
|---|---|
| PA-284 | Tape Transport |
| AF-230-101 | Record/Reproduce Electronics |