Otari MX-5050 Mini Pro

BQ-II Instruction and Maintenance Manual — Digital Edition

Otari's instruction and maintenance manual for the MX-5050 BQ-II, catalog no. OS3-031. The copy this edition comes from is not a factory print but an OCR transcription laid out in Word, and the OCR's mistakes are printed on its pages. This edition is taken from that copy's text layer. Mechanical OCR artefacts — split words, misread letters, a tilde printed for ± — are corrected, each one recorded, page by page, in the edition's source files; errors of substance are left as printed and marked, with what the MARK III/4 manual (OS3-035) prints at the same place. Sections 1 to 9 are transcribed; Section 10, the parts lists and schematics, is declared but not yet transcribed.

Part 0

Front Matter
Covers pages 1-8 of the PDF.

Part 1

General Information
Covers pages 9-16 of the PDF.

Part 2

Installation
Covers pages 17-23 of the PDF.

Part 3

Operation
Covers pages 24-36 of the PDF.

Part 4

General Information of Maintenance
Covers pages 37-39 of the PDF.

Part 5

Routine Maintenance and Conversion Information
Covers pages 40-49 of the PDF.

Part 6

Tape Transport Maintenance
Covers pages 50-58 of the PDF.

Part 7

Performance Testing and Electronic Alignment
Covers pages 59-78 of the PDF.

Part 8

Major Component Replacement
Covers pages 79-87 of the PDF.

Part 9

Troubleshooting
Covers pages 88-91 of the PDF.

Part 10

Parts Lists and Schematics

Declared, not yet transcribed.

← All manuals & documentation